Tag: Solar Panel Installation

Advantages of Solar Panel Installation for Your Home

Having solar panels installed in your home can increase the value of your home by a large amount. However, the process can be a little complicated. It may require permits and extra work. If you don’t have the time or expertise to complete the installation, you may want to hire a professional. Get the facts about Residential Solar Panel Installation
First, you will need to find a location for your new solar panels. Ideally, you want a spot that is not obstructed by trees or other structures. You also need to have some extra room to install the system. Depending on the type of system you have, you may need a backfeed breaker or other wiring.
Next, you need to install the mounting system. You may choose to use a ground mount or a pole mount. For a ground mount, you will need to have concrete or form bracing installed in order to support the solar panels. Alternatively, you may choose to use a roof mount. For a roof mount, you will need to have 2- or 3-inch mechanical tubing installed.
After the installation is complete, you will need to test the system to ensure that all wires are connected properly. If you have an off-grid system, you will also need to install a battery bank. Normally, the battery bank is located near the main panel, but if you have a grid-tie system with a battery backup, the battery bank may be indoors. If you have a solar inverter, it will be located near the main panel.
You should also check the performance of your new system. You can check the number of kilowatt hours produced by the panels at different times of the day. If the system is not producing as much electricity as it should, you can fix the problem. Alternatively, you can hire a company that will clean your panels.
Once you have the solar panels installed, you will need to connect the inverter to the system. You will also need to connect the generation meter to the consumer unit. The inverter will then turn the electricity into usable form. Then, you can turn on the electrical power and test the system. If you are installing the system yourself, you should remove the existing breakers and replace them with new ones. If you are not comfortable working on breakers, you should hire a professional.
Once you have your solar panels installed, you will need to test the system to see if the wires are properly connected. If they are not, you should reconnect the solar circuit wires to the breakers and turn them on one by one.
Before you install your solar panels, you will need to get a permit. Your solar panel installation contractor will need to apply for the permit before beginning work. It may take several weeks to process the permit. The permit is a safety precaution. You can also contact your municipal government to ask if you need to obtain permission to operate your solar system.